Programmable Counter

Product Details:

PRiCO (Programmble intelligent Counter)
PRiCO provides a very cost - effective and reliable solution to many complex counting requirement.
What sets PRiCO apart from the convention facet.
SPECIFICATIONS :
Counting modes
» Up counting
» Down counting
» Quadrature counting
» Bi-directional counting

Display
7-digit, seven segment LED display (10mm height)
» Counter/Totaliser/Batch: 7- digit display
» Rate : 5- digit display
» RPM : 6- digit display

Range
» Counter/Totaliser:Selectable least count 0.000001, 0.00001, 0.0001, 0.001, 0.01, 0.1, 1
» Rate: Rate per minute (RM) / Rate per hour (RH) user selectable. (minimum frequency for Rate mode is 10 Pulses/minute)
» RPM: 10 RPM to 360000 RPM

Set points

» 3 user programmable set points.
» SET1 , SET2 :Dedicated for COUNTER mode.
» SET3 : User programmable for any one of COUNTER / TOTALISER /BATCH / RPM.

Relay operating mode

» Relay ON mode
» Relay OFF mode
» Pulse time mode
a) Time pulse repeat mode
b) Auto-reset mode

Count inputs

» Voltage pulse : 8 to 30 V DC amplitude from proximity switch, encoder.
» Potential free contacts from limit switch, micro switch.

Input frequency
» 0 to 6 KHZ: In up / down mode
» 0 to 3 KHZ: In quadrature mode / bi-directional mode.

Sensor supply

» 12 V DC, 60mA (+/- 10 %)

Scale factor» Programmable» scale factor = X x 10Y X = From 0.000001 to 9.999999 Y = 0, 1, 2, -1, -2, -3, -4, -5

Reset input» Manual / Front panel reset: with enable / disable facility» Remote/ Back panel / Electrical reset: User selectable ( minimum time for remote reset is 10 ms. )» Reset through programming mode: User selectable

Relay outputs» Three Relays ( one relay for each set point )» Relay1/ Relay2 for set1/set2 operation ( COUNTER )» Relay3 for set3 ( COUNTER / TOTALISER / BATCH / RPM ) – Programmable» Relay ratings: Rated for 5 Amp at 230 V AC

Memory retention» Upto 10 years

Protection» Parameters a) Password protected b) Hardware protected (Dip switch setting)» Set points a) Software protected (Through program configuration i.e. ‘SdF 3.’)

Supply» 230 V AC (+/- 10%)

Mounting» Panel mounting

Weight» approximately 580 gms

Operating temperature» 0° to 50° C

Relative humidity» 10 - 95% non-condensing
Overall dimensions
» (All dimensions are in mm.)

Front View Side View Panel cutout

Product Details:

We are supplying multifunction counter, electronic counter, digital counter and digital indicator. These multifunction counter are very useful.

• Bi - direction Counter
• Compact Size: 48* 48* 100 mm
• 6 Digit, 7.6 mm sharp LED Display
• Two relay and 2 Transistorised O/P
• I/P: Encoder, Proximity sensors, Voltage Pulse
• Counting Frequency: 5 KHZ
• 5 Basic Functions easily Programmable (Count, Tacho, Time, Shift and Batch Counter)